Search
Micro-Swiss-All-Metal-Hotend-with-SLOTTED-Cooling-Block-for-Wanhao-i3-0-1
Micro-Swiss-MK10-All-Metal-Hotend-Kit-4mm-Nozzle-WANHAO-FlashForge-Dremel-Idea-Builder-0Micro-Swiss-MK10-All-Metal-Hotend-Kit-4mm-Nozzle-WANHAO-FlashForge-Dremel-Idea-Builder-0-0Micro-Swiss-MK10-All-Metal-Hotend-Kit-4mm-Nozzle-WANHAO-FlashForge-Dremel-Idea-Builder-0-1

Micro Swiss MK10 All Metal Hotend Kit .6mm Nozzle WANHAO, FlashForge, Dremel Idea Builder

$37.75 (as of December 1, 2016, 1:15 am)

Upgrade for MK10 Exturders
Nozzle Plated with TwinClad XT coating HIGH LUBRICITY WEAR RESISTANT
Kit Includes a Modified Thermal Barrier Tube, Modified Plated Nozzle and Thermal Compound

Buy product

Product Description

Spread the love
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Rate this post


This is an all metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one.Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. Kit includes 1 nozzle and 1 thermal tube. STEP BY STEP INSTALLATION INSTRUCTION http://www.micro-swiss.com/#!mk10-kit-installation-instruction/lt5wg
Upgrade for MK10 Exturders
Nozzle Plated with TwinClad XT coating HIGH LUBRICITY WEAR RESISTANT
Kit Includes a Modified Thermal Barrier Tube, Modified Plated Nozzle and Thermal Compound
Fits: FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3
Made in USA by Micro Swiss


Spread the love
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Additional Information

Brand

Micro-Swiss

EAN

0866086000231

EANList

0866086000231

MPN

MK10 All Metal w-.6mm nozzle

ProductGroup

BISS

Reviews

There are no reviews yet.

Be the first to review “Micro Swiss MK10 All Metal Hotend Kit .6mm Nozzle WANHAO, FlashForge, Dremel Idea Builder”