eSUN 3D Printer Filament: PETG
Extrusion Temperature Range: 240 to 255 Celsius
Plate temperature: 80~90 Celsius or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural).
Advantages of PETG: PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
There are a lot of eSUN PETG clients and experience sharing since it was released in 2014.
Ask ESUN/INTSERVO if you need help dial it in.
PETG requires slower printing speed than other materials.
1KG net (approximately 2.2 lbs) Filament with Clear Spool
eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 240C – 255C
Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″