3D Printing

The manufacturing of a 3D printed object is normally achieved using additive processes. What is an Additive process? Well It´s A process where an object is created by laying down layer by layers of material until the object is fully created. Each of these layers can be seen as a very thinly sliced horizontal cross section of the object.

3D Printable Tools

3D Printable Tools

14
Now that you 3DPrinted almost Every pokemon and hairy animal there is, Its time to Step it up and do some 3D Printable Tools! Here...
Jaguar Land Rover 3d printed glove

3D printed glove to protect workers in the automotive industry

1
Jaguar Land Rover create lightweight 3D printed glove to protect workers from musculoskeletal disorders. Jaguar Land Rover engineers are...
Simplify3d

Simplify3D 5.0 is coming!

0
The third party program Simplify3D will be releasing the 5.0 update sometime this year. Simplify3D is a paid for 3D slicing program in a...

How moist filaments will screw up your 3D-printing

18
It's not a myth guys. Moisture in filaments will really screw up your precious 3D-print! - Moist Filament 101 Not so long ago I decided...

Redefine Meat to launch its first alternative-meat 3D printer in 2020

0
Redefine Meat to launch its first alternative-meat 3D printer in 2020 If you follow the news of 3D...
Enhanced Open-Source N95 Mask Design Released For 3D Printing

Enhanced Open-Source N95 Mask Design Released For 3D Printing

0
Open-Source N95 Mask is the latest effort from the 3D printing community to curb the spread of the coronavirus. The 3D printing community is...
Feel the peel

Feel The Peel, 3D printed cups made from oranges

1
The innovative 3D orange juicer that prints bioplastic cups from leftover orange peels Design firm Carlo Ratti Associati designed...

East Coast RepRap 2019

2
It’s almost here, October 12-13, 2019 in Bel Air, Maryland. With the bankruptcy announced earlier this year by the Maker Fair...

ORGANIC, the collection of ecological shoes printed in 3D

1
The ORGANIC shoe collection is a collaboration between Lucie Trejtnarová, a postgraduate student at Tomas Bata University in Zlin, Czech Republic; the...
3D printer does not need STL to print

This new 3D printing format does not use STL files

2
Often, when talking about 3D printing, we must also mention the STL files. Tessellation language or STL was invented...
wheelchair

Engineering student 3D prints and donates wheelchairs for dogs

6
Alejandro Colli studies Computer Engineering at the National University of Avellaneda and uses a 3D printer to manufacture wheelchairs for dogs that need to recover mobility.

GalaXsea: A prototype of the first space solar sail boat 3D printed in space

0
A new vision of the future Designed by Eugeni Quitllet, GalaXsea is the first concept of a solar space...