Magigoo Adhesive Pen

This Magigoo Article is updated 2017-07-02 with specifications  We Just got to try a Wonderful Product by Magigoo, And believe me you will never use any other liquid adhesive after trying this one. I used Wolfbite  which worked fine but it was lacking something so i went to use Buildtak and Sitall glass but neither […]

Apply Magigoo adhesive

BuildTak – Is it Worth it?

Recently I have been trying out a popular solution to the 3D printer adhesion problem we all face. There are many solutions such as blue tape, Kapton tape, glass and the list goes on. And then there is the debated one called BuildTak. There are several conflicting views on this product ; many complain about it’s […]

FAQ about 3d-printing

3D Printer Surface Comparison

Whenever you ask someone or search on the web on what surface you want on your 3D printer’s bed you will get heaps and heaps of contradicting answers. Some people swear by masking tape, some people swear by glass. So what’s the answer? Well that’s what I want to explore today: I will be comparing […]

Top 3D Printer Adhesives

3D printer adhesives you should try Adhesives is a must for almost everyone using a 3D Printer and it can certainly be a real pain in the b.. if you buy the wrong one. We put together a small list of different 3D Printer Adhesives for your bed, try one of these. and tapes. Enjoy! […]

3d Printer adhesives

WolfBite MEGA Premium Heatbed Adhesion Solution

I have had success using a 122 deg. C. heated bed with a thin coating of Wolfbite Mega on a clean mirror, in conjunction with an enclosed printer and a chamber temperature of 60 deg. C. Higher chamber temperatures might further reduce part delamination and warping, but it hasn’t been tested by any of my collegues.

Wolfbite MEGA