BIQU Kossel Pro Delta – Review

BIQU Kossel Pro Delta - 3D Printer Review

11 2,314
BIQU Kossel Pro Delta – Review
4.9 (97.5%) 16 votes

I want to thank Biqu for sending me there Pro Edition Delta for review.  As I always I try and give a totally fair review with the Good, the Bad and The UGLY!
Lets start with Biqu the company themselves. Biqu is one of the largest suppliers of 3d printer parts and electronics in the world. If you have a printer, there is a good chance some of, if not a lot, of the parts are from Biqu, just rebranded with OEM service. With that said it makes sense that Biqu started dropping their hat into the 3D printing world and the Biqu Pro is a great start!

Let’s start with The Biqu Kossel Pro Delta stats

The Biqu Kossel Pro Delta is a large delta style printer with a 250mm base and a 350mm Z height. The Pro has linear rails, TMC2100 steppers, clone E3DV5/6 style hotend with an all metal extruder and comes with authentic BLTouch. The controller board is basically Biqu version of a MKS Gen board. You also get a color touch screen with SD card support. All parts are metal (like the effector which I was happy to see!) or are mold injected, except the hot end/print cooler (more on that in a bit) and the LCD cover. It also comes with a glass bed to print on, which is removable.

Now let’s get into the nitty gritty….

The Biqu Pro was packed very well, everything was labeled very nice and the instructions were very professional (a nice booklet printed on nice shiny thick paper). There were some single printed sheets for updated bits to construction. All the wires were terminated except the power cord (again more on that next.) I have to say I was very impressed right off the bat of the overall thought put into this printer kit. Right away it had a professional feel

It took me less than a few hours to complete the printer and I was getting very excited, as you could tell this was well thought out….then a few things came up.

Telli Mantelli Reviewer - 3D Printer Chat

to the whole kit, which I honestly wasn’t expecting.

First and foremost it came with no off and on switch, which I’m not sure about internationally but isn’t expectable in North America. It was just and US plug-in cord not terminated. This has changed as I let them know this needed in North American market.

Not Impressed With The Hotend Printer Cooler Combo..

Next was the hotend print cooler combo, this was junk and the print itself was horrible, which to be honest at this time wasn’t giving me a lot of confidence in the printer. This was an easy fix as Biqu has a great support page (this link Here) with a great community that had made a sweet circular cooler using a 50×15 blower fan.

Now the last thing to nitpick about is I wish they had added an usb cable extender to the board, as any time I wanted to update the firmware it was either leave a usb cord plug in coming out the bottom, or lift up the printer and plug it in.

Biqu Kossel Pro DeltaSome DIY skills saved me

With that said I added a rocker switch and printed a box for it and added an usb extender myself. I had also in the end change the extruder to  the B’struder from thingiverse (Linked Here) this was a personal choice as the stock work great, I just love that extruder for deltas. I had also changed the heatbreak to a real E3D one as I find they turn any clone into a very good hot end.  The heat break from the stock was not good either. The heat break allowed the PTFE tube too far down in my opinion and was very close to the heater block, to the point I thought it was… The very small lip on the inside wasn’t the best and we can see many pushing the PTFE tube past that point. Once again an easy solution but want to be totally honest with any issue I’ve had.

Next I flashed the firmware and started auto level. There were a few issues in the beginning but once again he community to the rescue with a solid firmware and all was good! The firmware was great as I didn’t need to do anything but hit auto level on the lcd and then set my nozzle offset in Marlin. For those not familiar with editing a firmware you can also do this through gcode and a program like Pronterface, RepetierHost and you don’t need to be a rocket scientist or programmer, it pretty easy!

Dino Printed on Biqu Kossel DeltaIt was print time! (The dino was done with stock extruder)

So I did a few test prints to tweak retractions and then right off the bat wanted to get printing! So I printed the Boon Dino from 3Dkitbash for my son and it turned out amazing! Every piece fit great, the quality was great at 0.2mm layer height and I was printing at 80mm/s. To say I was super impressed was a understatement. Oh and did I mention how quiet this printer is…all you can hear are the fans and even then it probably one of the most quiet out of all my the printers that I have! I tried more than a few different types of materials, PLA, PETG APLA and all printed great! Now with like most Bowden systems Flexi isn’t the easiest and even sometime possible to print. ABS also wouldn’t be a great material for this printer as it’s open air and ABS really does need to be enclosed to print well without any issues (warping, shrinkage and such)

Print after print it just worked..

..with the Bltouch, every first layer was perfect. To the point I just hit start and didn’t look back, that’s how confident I was in this printer! Also having the BLTouch took away a lot of the headaches of configuring a delta printer. If you ever had to manual level a delta you know it can be somewhat of a pain, and I was very glad I didn’t have to through all of that!

I had this printer for over a month now and it never failed.  I trusted and love this printer so much that I knew a good buddy of mine who has full blown shop (printers, lasers and all the big toys) wanted a larger format printer. Right from the first print he was impress with the speed and quality and actually a customer came in and first thing they said was..”Wow that’s a lot faster than my printer!” He had a Tevo Tarantula.  There’s just something about watching a Delta style printer print. With its almost robotic and hypnotizing movement, it looks very futuristic. My friend is now using this printer professionally in shop and he loves it!

Biqu Kossel DeltaSo yes it wasn’t all gravy..

But let me say that by the time you read this article, most if not all these issue have been fixed or corrected by Biqu. The only thing not change over all is the heatbreak , which to me is something minor but still would like to see a better quality one. Biqu does listen to their customers and want to have a community behind them. To the point when they had seen a post of mine how much I love BLTouch on the Pro, they contacted me for help with some firmware settings.

BIQU has very active reps on Facebook

Something I was very impressed with was… well Biqu themselves. Their reps are very active on the Facebook page and they always answered any of my question or concerns and really do listen to the customers. I’m going to be honest, even though they did send me this printer for review I didn’t expect the great support I’ve seen them give their customers. You can tell they want to build a community that loves there brand, similar to what Wanhao, Tevo and other companies from China have done.

The Biqu Pro Delta with all it goodies is about $400ca shipped to your door. For a fast, accurate, quiet with linear rails printer you just can’t go wrong!

Was The BIQU Delta just another kit from China?

Going into this I honestly thought it was going to be. I’ve bought my fair share of cheap DIY kits from China/Aliexpress and 90% of the time they were more headaches then they were worth and all of them have been parted out to other printers. This was different but with some minor similarities. Even though Biqu is a massive parts supplier you can tell this was their entry into the 3D printer world. Now in all honestly they did it well and they are ahead of many companies when it comes to a well thought out product. You can tell they want to make a name for themselves and I can see their future printers being more refined, branded and high quality. (They have done this with their Magician Mini Delta printer, review coming.)

Conclusion

In the end if you’re looking for a low cost large format Delta style printer that is fast, accurate, quiet with a great community you can’t go wrong with Biqu Kossel Pro Delta.

 PROS

  • Linear rails
  • Tmc2100 stepper make the printer very quiet
  • Easy to follow directions
  • Fast and accurate
  • Large print area.

CONS

  • Needs better stock print cooler
  • Heat break let PTFE tube way to close to block
  • LCD cover printed
  • Stock firmware should be updated to community firmware

 

 

11 Comments
  1. Michael says

    Looks like a decent deal

  2. Richard Bynum says

    I’ve always liked to watch Delta style printers work. There’s something about the arms moving all in sync that’s hypnotizing. It looks like a nice 3d printer and the great thing about it is the help he said they offer in the community and on Facebook. One day I would like to get a Delta printer and when that time comes I’ll take a look at this one first!

  3. Toth Zoltan says

    I own one, and when you upgraded the cooler fan with a radial one this printer is a monster! Very precise and a accurate, since hundreds of prints I have no problem with it, just some grease on the rails and go 💖😍
    I own 2 and 4 Biqu Magician, I’m interested love of this cheap but ultra good printers!

  4. Tom Baxter says

    I was looking at getting a delta style printer as my first printer but was intimidated by the apparent complexity of them. I am now looking at buying my 2nd printer and this delta here is definitely in the running! Thank you for the honest review.

  5. Telli Mantelli says

    Thanks for the comments guys and gals! I always try and be honest with my review and not only that but if there issue I like to work them out and let you guys know how I did that instead of just complaining about the printer! Once again Im glad you guys enjoyed it!

  6. Rafael Ourique says

    Maybe the version 2 of this machine will be all that we want it to be

  7. malvasio says

    Telli why don’t you review some open-sources 3dprinters ?

    1. Tom Baxter says

      I agree. I think it would be good to see some reviews of kits and open source printers. It would also allow for reviews of individual printer components as well. Buy these motors, use this board or firmware, etc.

  8. Dana Langham says

    Great review, thanks!

  9. D. says

    I agree with Richard. Watching this would be so… mesmerizing!

  10. Riley says

    Great review. As someone that is just beginning to learn about 3D printing, sometimes it can be more helpful to hear about what can go wrong with a product than what it does right. Very informative fixes as well.

Leave A Reply

Your email address will not be published.