Sydney Toddler with cerebral palsy takes first steps wearing 3D printed orthotics

10 113
Sydney Toddler with cerebral palsy takes first steps wearing 3D printed orthotics
4.8 (95%) 8 votes

A toddler has taken her first independent steps wearing 3D printed orthotics made by Australian start-up AbilityMate

Eve Darcy was diagnosed with cerebral palsy only a few weeks after her birth; it wasn’t a surprise that Eve could only walk aided by a rolling frame as she growing. But now, after a couple of days wearing 3D printed orthotics, she’s happily walking by her own and doing everyday activities like a normal child.

“She was in daycare on Wednesday, she walked in with her frame, she didn’t go Thursday, and she walked in on her own on Friday. It happened so fast, she just took off”. Said Joe Darcy, Eve’s father.

3d printed orthetics
Eve Darcy independent walks thanks to her new 3D printed orthotics.

Attending a global problematic

In Australia, where Eve lives, a child is born with cerebral palsy every 15hr. As a result, this is the most common childhood physical disability in the country so far. While most of these children need to wear orthotics throughout their life, the current waitlist to get to see an orthotist can take up to eight months, and, once the child has finally an appointment, he or she is subject to an impractical plaster casting process. From there, it can take up to 12 weeks to turn that cast into a wearable device.

What is more concerning, according to the World Health Organization, 100 million children are in need of orthotics worldwide, and demand is exponentially exceeding supply.

About AbilityMate

AbilityMate is a small company in Sydney’s west. The startup is currently working towards a future where people with disabilities can have affordable and faster access to the assistive products they need.

AbilityMate’s vision embodies the mantra “Design Global, Manufacture Local”

3d printed orthotics
A pair of AbilityMate’s Magic Shoes.

Although their model applies to many different devices, they decided to begin with a focus on one of the greatest need areas: customized Orthotics for children.

The Magic Shoes Project

AbilityMate use 3D printing technology to create tailored orthotics or ‘Magic Shoes’ in a fraction of the time a conventional process requires. They utilize a 3D scanner to take the necessary measurements of the child’s foot. Then an expert orthotist model it to medical requirements and 3D print the Orthoses; they use an industrial EOS SLS Printer with medical-grade Nylon material.

Magic Shoes are manufactured at a factory in Guildford and can be fitted in less than two months.

3D scanning the necessary measurements of a child’s foot.

Expected Project Outcomes  

  • Improvement in Wait Times – Reduction of wait times by 50-80%.
  • Increased Efficiency of the Orthotists – by 400-600%, freeing them up to help more kids.
  • Improved Patient Experience – Development of child centric technologies that fundamentally changes the patient’s experience for the better.
  • Decrease in Total Cost of Care – Cost savings for families, clinics , NDIS and other equipment funding bodies.

*Source: AbilityMate

The start-up project is now searching for 30 children to trial the shoes.

AbilityMate is currently launching a groundbreaking initiative to help children with walk disabilities. They are looking for 20 to 30 children, ages 2-8 years old, who are in need of ankle/foot orthotics and meet strict inclusion criteria to participate in a clinical trial of 3D Printed AFOs. If this other trial result as positive as Eve’s, AbilityMate shall start commercializing their Magic shoes in Australia.

Another of their goals is to make designs available for global collaboration through a safe & ethical open license and training program.

3d printed orthotics
Meanwhile, Eve’s mother Hiam Sakakini said her 16-month old is progressing. “Eve can just play in the playground like a normal child […] I can go into a playground with her and she can just go.”

The organization also needs research partners and orthotists to be among the first to offer Magic Shoes in Australia. So, if you’re interested in applying for any of the above, you can take a look at their site.

 

Stay updated with 3dprinterchat, More news coming up soon!

10 Comments
  1. Ceufon says

    I just found this blog, I would like to know more about the subject, I think 3d printing would help a lot in my work

    1. Diana Segura says

      Well, hello! and welcome to 3dprinterchat.com, all you need to know about 3D printing and related topics is here! just use the search engine or forum.

      Anything else you want to know just send me a pm and I’ll be glad to help 😀

  2. Richard Bynum says

    So very awesome and inspirational!! The price of orthotics will be cut and the poor will benifit greatly from the people with 3D printers! Another great reason to spread the news of what they are capable of!

    1. Diana Segura says

      This is the kind of projects startups worldwide should implement! There’s so many people to bless out there.
      Thanks for sharing 🙂

  3. mperkins37 says

    Loving the medical implications

    1. Diana Segura says

      More of these medical 3D printing articles coming up! Wait for them 😀

  4. Jared Heifetz says

    Truly beautiful! I hope I get an opportunity to help someone like that.

    1. Diana Segura says

      Anyone owning a 3D printer (and time enough to use it properly) can help by starting little but significant projects to help people around, that’s what I love about this community <3

  5. Pam Jackson says

    Interesting article. God bless the people at AbilityMate for the amazing work they are doing

    1. Diana Segura says

      I love what they´re trying. Thanks for comment Pam 🙂

Leave A Reply

Your email address will not be published.