Get more from your cyclops scanners

8 464
Get more from your cyclops scanners
5 (100%) 3 votes

Laser mod

I, like many of us, picked up a 3d scanner a while back and after many attempts to get things to scan started scouring the internet for ways to get more from my scanner. The review for that will come in the future as I am still testing mine. One of the things I noticed while treading the vast wilderness that is Google search is that Google hates me. I’m joking please don’t flag my ip google. What I noticed was that higher end scanners that have lasers as their surface detection system all have green lasers. So I ordered a pair and when they arrived I found they were much better than the red lasers that came in the kit. I want to say that the kit is great for what you get but a little money and some mods could make them so much better.

Why green Line lasers?

So after more google Foo, it seems that there are a couple Reasons why this is a better match. Most of us use Logitech scanners. According to people that are smarter than I, Logitech’s Camera’s see at 532nm better than the rest of the spectrum (all links below). I’ll let you read the forum posts on this for more info. The idea makes sense though when you back that with the fact that any high-end camera based scanner that uses lasers seems to have green as it’s preferred laser.

Voltage issues

The next problem and where I am currently stuck at is the voltage. My driver board doesn’t put out 3 volts. I’m not sure if this can be rectified through the Arduino or the driver board. I’m good at finding hardware fixes, though. So I ordered a pair of dc to dc voltage converters. If any of my readers know if there is a way to boost the voltage please let me know but for now, I’m waiting on my converters. They aren’t that expensive and if I don’t end up needing them here I’ll use them in something else.

My test Rig

Given that I don’t have working scanner images yet we will leave this as a To be continued. When I get this up and running I will update this post and time stamp the update. The power source here is one of those phone booster packs  You wouldn’t believe how hackable these things are. Pull the case off and you have a battery pack for a wide verity of projects and it already has battery protection and charging protection. If you keep all the ports your project can still charge a phone as well. I usually wait till these go on sale and buy a bunch. This is still all a work in progress but I’m expecting this to make a vast improvement on my scanner. Let me know if you decided to try it yourself or know if you know of any other great mods to these scanners.

Sources

DAVID-Laserscanner Forum

http://forum.david-3d.com/viewtopic.php?t=1631

http://forum.david-3d.com/viewtopic.php?f=7&t=1337

All links to stuff I own are amazon affiliate.

Line lasers  http://amzn.to/2mFruea

Power converter  http://amzn.to/2m6qYZY

Battery Pack http://amzn.to/2mFARul

8 Comments
  1. [email protected] says

    Thanks for sharing this information.

  2. BoozeKashi says

    Following along with interest on this Nathan, I am not an Elec. Engineer either but to my knowledge a boost converter or a transformer is what you need. But the Ciclops has a 5V rail on USB I thought, so wouldn’t it be possible to draw power from that? Just a thought.

    Sadly, Amazon said ‘no frickin’ way’ to shipping me lasers, but I’ve got Baan Mo Market here so no worries.

    I really hope you get it worked out, I kind of shelved the Ciclops, it was just too much fussing to get half decent scans that still required tons of cleanup. Would love to put it to use again.

  3. mperkins37 says

    thanks for the info

    1. Nathan Cox says

      Thanks, I may buy some for a future project I have in mind but the problem is the lasers are powered and triggered by the same source so I need to take that voltage and increase it just enough to power the new lasers. these won’t do the job. But I am going to need something like this for a raspberry pi project soon.

        1. BoozeKashi says

          That looks like exactly what’s needed,I think. Big plus, they are small enough that once you get them tuned they’ll stuff inside the Ciclops shell. Very nice find and dirt cheap!

          And Hong Kong shipping for me is about 3-4 days. Thank you both so much, I want to get this Ciclops scanning better.

  4. Richard Bynum says

    Was wondering if you’ve finished the scanner? I would like to give it a try myself but I’m going to need to go by what you came up with. I am NOT very smart when it comes to electricity and boards…I’ve had many ruined by me tinkering around with them and even a couple of small fires! But when I hear “LASER” I get excited and want to start playing around with one!! LMAO! Maybe I’m not too bad when it comes down to it 😉 so I’m gonna start looking this up and ordering. I’ve always wanted to play around with a scanner!

Leave A Reply

Your email address will not be published.